Low-noise RF Preamplifier

From RF Coil Lab
Revision as of 15:07, 10 August 2020 by Jaystock (talk | contribs) (→‎Design)
Jump to navigation Jump to search

Lna picture.jpg


A low-noise amplifier for early gain stages that functions at at a range or radio frequencies. Functions using the PHA-13LN+ (see parts list at bottom).


The LNA is housed inside a 0.75" X 0.5625" X 0.58" RF enclosure (see parts list at bottom). The enclosure takes SMA input and output, and requires 6+ V DC with ~75 mA of operating current. The enclosure is connected to the board and SMA GND. The current model does not have impedance matching incorporated.

This layout is adapted from the PHA-13 datasheet from Mini Circuits.
Lna inside.jpg
Lna schematic pic.png



[Gain data needed]

Safety limits

[Safety data needed]


The LNA was tested on the Halbach table-top scanner (~3 MHz center frequency) as a gain stage, along with the Minicircuits ZFL-500LN+ [1]. It demonstrated similar SNR to the lab's current AU-1583 amplifiers when total gain was comparable, using different gain stages. The domain chosen as "noise" is delimited by vertical dashed lines. All testing data is included below.
Lna snr pic.png
Lna miteq snr pic.png


KiCAD file:
Parts list:
Testing data: