Current driver:RevD

From RF Coil Lab
Revision as of 12:40, 11 May 2021 by Dstraney (talk | contribs) (initial)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

Revision D of the design is a major change from revision C, with real-time waveform playback, improved control loop performance, and better DFM.

Design

Similar to revision C, the user's computer communicates with the current driver box: a single digital control board which interfaces with multiple (up to 8) 8-channel amplifier boards, each containing a DAC for setting output current, an ADC for monitoring output current, and 8 copies of the analog control loop and power amplifier. Each amplifier board consists of two sections: a power section mounted to a heatsink, and a control section mounted to the power section. Power outputs run over ribbon cables to an ODU-MAC White-Line connector for connecting the shim coils. (Block diagram)

Design files: Amp control board: File:Amp ctrl revD1A.zip Amp power board: File:Amp pwr revD1.zip Digital control board: (TBD) Output connector board: (TBD)

Assembly Instruction

(TBD)

Performance

Retrieved from "http://rflab.martinos.org/index.php?title=Current_driver:RevD&oldid=549"