Difference between revisions of "Main Page"

From RF Coil Lab
Jump to: navigation, search
Line 5: Line 5:
 
''This page is under construction -- thank you for your patience as we upload materials...''  
 
''This page is under construction -- thank you for your patience as we upload materials...''  
  
 +
''NEW: (July 2016)'  MATLAB code is now available for multi-coil shim array wire patterns and optimal shim current calculation (constrained optimization).  Please see the Multi-coil B0 shimming section below.   
  
  
 
== Resources ==
 
== Resources ==
 
* [[Current driver:Current driver|Multi-channel current driver board]]
 
* [[Current driver:Current driver|Multi-channel current driver board]]
 +
 
* [[Multi-coil B0 shimming|Multi-coil B0 shimming research methods]]
 
* [[Multi-coil B0 shimming|Multi-coil B0 shimming research methods]]
 +
 
* [[Information and How-To guides for building RF coils]]
 
* [[Information and How-To guides for building RF coils]]
  

Revision as of 12:05, 11 July 2016

Radio Frequency Laboratory of the Wald Group at MGH

This page contains resources for RF coil design, fabrication, and testing related to the work conducted in the RF Lab of Dr. Lawrence Wald's group at the A. A. Martinos Center for Biomedical Imaging, Massachusetts General Hospital, Boston, MA, USA.

This page is under construction -- thank you for your patience as we upload materials...

NEW: (July 2016)' MATLAB code is now available for multi-coil shim array wire patterns and optimal shim current calculation (constrained optimization). Please see the Multi-coil B0 shimming section below.


Resources

Links to other Wikis in the Wald Group