Difference between revisions of "Low-noise RF Preamplifier"
(→Design) |
|||
(8 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | [[File:lna_picture.jpg| | + | [[File:lna_picture.jpg|400px]] |
== Overview == | == Overview == | ||
A low-noise amplifier for early gain stages that functions at at a range or radio frequencies. Functions using the PHA-13LN+ (see parts list at bottom). | A low-noise amplifier for early gain stages that functions at at a range or radio frequencies. Functions using the PHA-13LN+ (see parts list at bottom). | ||
+ | |||
+ | Project contribution by Lincoln Craven-Brightman, Research Engineer in the MR-PIGs group. | ||
== Design == | == Design == | ||
− | The LNA is housed inside a 0.75" X 0.5625" X 0.58" RF enclosure (see parts list at bottom). The enclosure takes SMA input and output, and requires 6+ V DC with ~75 mA of operating current. The enclosure is connected to the board and SMA GND. The current model does not have impedance matching incorporated. | + | The LNA is housed inside a 0.75" X 0.5625" X 0.58" RF enclosure from Lotus Communications Systems (see parts list at bottom). The enclosure takes SMA input and output, and requires 6+ V DC with ~75 mA of operating current. The enclosure is connected to the board and SMA GND. The current model does not have impedance matching incorporated. |
+ | |||
+ | This layout is adapted from the PHA-13 datasheet from Mini Circuits. | ||
<br /> | <br /> | ||
− | [[File:lna_inside.jpg| | + | [[File:lna_inside.jpg|400px]] |
<br /> | <br /> | ||
[[File:lna_schematic_pic.png|1000px]] | [[File:lna_schematic_pic.png|1000px]] | ||
Line 14: | Line 18: | ||
== Specs == | == Specs == | ||
=== Gain === | === Gain === | ||
− | [ | + | The LNA demonstrates a gain of above 20 dB over 1-100 MHz. Gain slowly falls off to 17 dB at 1 GHz, and drops sharply below 1 MHz. |
+ | <br /> | ||
+ | [[File:LNA_S21_100_label.png|500px]] | ||
+ | <br /> | ||
+ | [[File:LNA_S21_1000_label.png|500px]] | ||
=== Safety limits === | === Safety limits === | ||
Line 20: | Line 28: | ||
=== Testing === | === Testing === | ||
− | The LNA was tested on the Halbach table-top scanner (~3 MHz center frequency) as a gain stage, along with the Minicircuits ZFL-500LN+ [https://www.minicircuits.com/WebStore/dashboard.html?model=ZFL-500LN%2B]. It demonstrated similar SNR to the lab's current AU-1583 amplifiers when total gain was comparable, using different gain stages. All testing data is included below. | + | The LNA was tested on the Halbach table-top scanner (~3 MHz center frequency) as a gain stage, along with the Minicircuits ZFL-500LN+ [https://www.minicircuits.com/WebStore/dashboard.html?model=ZFL-500LN%2B]. It demonstrated similar SNR to the lab's current AU-1583 amplifiers when total gain was comparable, using different gain stages. The domain chosen as "noise" is delimited by vertical dashed lines. All testing data is included below. |
<br /> | <br /> | ||
− | [[File:lna_snr_pic. | + | [[File:lna_snr_pic.png|500px]] |
<br /> | <br /> | ||
− | [[File:lna_miteq_snr_pic. | + | [[File:lna_miteq_snr_pic.png|500px]] |
== Files == | == Files == | ||
KiCAD file:<br /> | KiCAD file:<br /> | ||
[[Media:lna_kicad.zip]]<br /> | [[Media:lna_kicad.zip]]<br /> | ||
+ | Parts list:<br /> | ||
+ | [[Media:lna_parts.txt]]<br /> | ||
Testing data:<br /> | Testing data:<br /> | ||
− | [[Media: | + | [[Media:lna_test_data.zip]]<br /> |
Revision as of 14:49, 17 September 2020
Overview
A low-noise amplifier for early gain stages that functions at at a range or radio frequencies. Functions using the PHA-13LN+ (see parts list at bottom).
Project contribution by Lincoln Craven-Brightman, Research Engineer in the MR-PIGs group.
Design
The LNA is housed inside a 0.75" X 0.5625" X 0.58" RF enclosure from Lotus Communications Systems (see parts list at bottom). The enclosure takes SMA input and output, and requires 6+ V DC with ~75 mA of operating current. The enclosure is connected to the board and SMA GND. The current model does not have impedance matching incorporated.
This layout is adapted from the PHA-13 datasheet from Mini Circuits.
Specs
Gain
The LNA demonstrates a gain of above 20 dB over 1-100 MHz. Gain slowly falls off to 17 dB at 1 GHz, and drops sharply below 1 MHz.
Safety limits
[Safety data needed]
Testing
The LNA was tested on the Halbach table-top scanner (~3 MHz center frequency) as a gain stage, along with the Minicircuits ZFL-500LN+ [1]. It demonstrated similar SNR to the lab's current AU-1583 amplifiers when total gain was comparable, using different gain stages. The domain chosen as "noise" is delimited by vertical dashed lines. All testing data is included below.
Files
KiCAD file:
Media:lna_kicad.zip
Parts list:
Media:lna_parts.txt
Testing data:
Media:lna_test_data.zip