LT-SPICE simulations of RF receive coil element tuning and matching

From RF Coil Lab
Revision as of 11:19, 26 April 2022 by Jaystock (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

We have developed a simple LT-SPICE model for simulating MRI RF receive element tuning and matching circuits to pick component values before tuning up a test loop in the lab. There are two coil models. The first is used to assess preamp decoupling and PIN diode detuning performance. This model uses a "dummy double probe" with two inductive ports that are lightly coupled to the coil loop allowing for a two-port S21 measurement of the coil resonance. By modifying the model to remove the preamp, you can also look at the open-circuit resonance. The second model assess the impedance match looking toward the coil from the preamp.

The component values can be set using variables to update both coil models simultaneously. The model includes a plot file that should automatically show S21 with the PIN diode ON, S21 with PIN diode off (just change the frequency axis as needed).

How to set up a basic coil model:

  • Coil loop inductance is specified by "L1". Adjust tuning and matching capacitor values (or add more matching elements as needed).
  • Specify the input impedance of the preamp using "Rpreamp and Lpreamp".
  • Set the desired length of cable (and cable impedance)

Click here to download LT-SPICE model:

Here is a good reference paper that explains how to choose network topologies and calculate component values for simultaneously (i) matching the coil to 50 ohms and (ii) transforming the preamp impedance to a high impedance at the coil drive point ("preamp decoupling"): Reykowski A., et al., MRM 1995

Version of LT-SPICE simulation used for ENC April 2022 demo:

LT-SPICE model was created by Lincoln Craven-Brightman in 2021.

Screen Shot 2022-02-24 at 5.56.15 PM.png